Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
1955-1957 Chevrolet Bel Air Long Tube Headers Hooker Super Competition 2112-1HKROverview With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10% better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotive drag racing history.
Overview
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10% better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotive drag racing history.
Features
- Tuned-length primary tubes for maximum exhaust scavenging and velocity
- Mandrel-bent tubing for smooth exhaust flow
- Light weight & sturdy 18 gauge tubing
- Long transition collector for decreased back pressure
- 5/16" machined flanges for a perfect seal
- Industry's best welds for durability
- Designed for optimal performance
- All necessary hardware included for a complete installation
Application
- Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Hooker recommends using cast iron exhaust manifolds or old headers during your engine break-in period to avoid damaging your coated damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Specs
| Brand | Hooker |
| Collector Diameter | 3.00 inch |
| Emission Code | 3 |
| Header Finish | Silver Ceramic |
| Header Style | Long Tube |
| Primary Tube Dia. | 1-3/4 inch |
| Product Type | Headers |
| Tube Material | Mild Steel |
| Warning | California Proposition 65 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1291 reviews
Sort
Product Reviews
★★★★★ 4
Slightly challenging build
Color: Beige, Size: A-88''W-4 Panel
This was my second screen set I've purchased, first of this style. Not the easiest to assemble. Lots of pulling and tugging; not a highlight in my day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
★★★★★ 5
Commercial grade divider suitable for many needs
Color: Beige, Size: A-132''W-6 Panel
This item will be used at a future event where we need to separate a single locker room into two large areas, without any construction. This divider is perfect for the job because the partitions can be 1 to 6 panels and it will roll into place. When the event is over, the divider will fold/roll away and the locker room will return to its original design.
The unit is very heavy, which will ensure that it is sturdy and stable. All the components arrived, wrapped in plastic to prevent damage. The screen material is a woven polyester in a cream color that will occlude any visibility but it may be possible to see shadows on the opposite side. The height is about 6ft, which would require a very tall person to "peep over" the divider.
I needed a quality unit for this project and the frame, screens, and mobility will meet the needs. The divider is not the same as the small decorative dividers -- it is more of a commercial grade product, yet tasteful. If you want/need a small divider as an accent piece, this is not the best choice. This item could be used in a medical office, treatment/massage room, to divide an office room into two, or block a hallway in a building.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 2
Flimsy
Color: Grey, Size: B-88''W-4 Panel
Would not recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
★★★★★ 5
Great option for a professional looking backdrop
Color: Black, Size: B-102''-3 Panel
I decided to try these wall dividers for my home office space since it does not have a door. I wanted to have my video calls without the rest of the room in the feed to give it a more professional feel. These being on castors make them super easy to move into position and roll off to the side when not in use. They are stable, much more than the folding screens I have tried in the past. That they are connected by the middle piece and not the top/bottom of each other allows you to adjust the positioning to your needs. Overall, this did exactly what I needed and was an affordable option. I also like that they are highly portable: if you want to take them for a booth or event, the poles all disassemble into manageable lengths that easily fit in a car and take very little time to set up again. The only thing I would change is to include a bag to store them in for transportation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 17, 2025
★★★★★ 5
Pretty good, especially for this price point.
Color: Beige, Size: 21.5"- 1 Panel
This is merely a piece of cloth stretched between the frame borders, but it works perfectly. It arrived quickly, all parts present and in good condition. I didn't put the castors on, as it will be more or less always in one position. I simply attached some felt sliders on the bottom to prevent scratching the floor and to allow clearance for the center screw (which is not flush fit). Overall, a reasonable deal for the price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026