Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Track4 Brake System Front 4301401GBFits 1955 68 Chevy Full Size Passenger Cars w OE Drum Brake Spindle & 1963 68 Chevy Corvette w OE Spindles (All) Features: 2 Piece, 4 Piston, T4 Caliper Manufactured in Phoenix, AZ CNC Machined from US Sourced Forged or Billet Aluminum Powder Coated Finish Stainless Steel Pistons, Abutments and Noise Suppression Clips Staggered Pistons to Minimize Uneven Pad Wear Dual Seals, Dust Weather & Pressure 1 Piece Slot, Drilled, Zinc Plate Rotor Specs:
Fits 1955-68 Chevy Full Size Passenger Cars w/OE Drum Brake Spindle & 1963-68 Chevy Corvette w/OE Spindles (All)
Features:
- 2-Piece, 4-Piston, T4 Caliper Manufactured in Phoenix, AZ
- CNC Machined from US Sourced Forged or Billet Aluminum
- Powder Coated Finish
- Stainless Steel Pistons, Abutments and Noise Suppression Clips
- Staggered Pistons to Minimize Uneven Pad Wear
- Dual Seals, Dust/Weather & Pressure
- 1-Piece Slot, Drilled, Zinc-Plate Rotor
Specs:
| Applications | Chevy Full Size Pass Car 55-68 |
|---|---|
| Applications | Chevy Corvette 63-68 |
| Axle | Front |
| Brand | Baer Brakes |
| Caliper | T4 |
| Caliper Color | Grabber Blue |
| Disc Brake Caliper (Front) Piston Quantity | 4 |
| Disc Brake Caliper (Front) Type | Fixed |
| Disc Brake Pad FMSI Number | D0749 |
| Disc Brake Rotor (Front) Construction | Vented |
| Disc Brake Rotor (Front) Outside Diameter | 13.000IN |
| Emission Code | 6 |
| Export Description | Brake Components |
| Fitment Notes | w/OE Drum Brake Spindles |
| Fitment Notes | w/OE Spindles |
| Grade Type | Performance |
| Hose Material | Stainless Steel |
| Lug Count | 5 Lug |
| Min Wheel Dia (verify using template) | 17IN |
| Product Line | 13 Inch Track4 |
| Product Type | 13 Inch Track 4 Front Brake Kit |
| Prop 65 (C, R or CR) | CR |
| Prop 65 - Long Label | WARNING: This product can expose you to chemicals including Toluene Diisocyanate, and Nickel which are known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov |
| Prop 65 Yes/No | Yes |
| Rotor Thickness | 1.100IN |
| Rotor Type | 1-Piece |
| Surface Type | Slotted, Drilled & Zinc Plated |
| System Notes | For stock spindles, increased track width .900 per side |
| Template | Q082H |
| Title | Track4 Brake System Front |
| Wheel Lug/Bolt Pattern | 5x4.75 |
| Wheel Stud Size | 1/2-20" x 2.25" |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1438 reviews
Sort
Product Reviews
★★★★★ 5
Nice pipe shelves! Excellent quality!
Size: 28inch Tall (NOT included wood planks), Color: Black
I really like the fact that the pieces were already painted. I compared the cost of the unit to buying the pieces from the big box store and this was far more cost effective for me.
The installation went well and I ended up creating a template for installation. For the template, I measured the width of one of the flanges (part that mounts to the wall), cut a piece of material the same width. I found the center and drew a line down the middle. I then placed the section with top and bottom holes over the center line and then marked the other two holes.
I then drilled out the holes, put on wall and used level to plumb. I used small pilot drill bit to drill through the template into the wall.
One thing to note is that I did not use the included anchors instead opting for some from the big box store.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2020
★★★★★ 5
Well built and priced
Size: 42inch Tall (NOT included wood planks), Color: Black
I saw these on line and decided I could probably just build one on my own. After pricing the parts out at the local hardware store, it was almost the same price, and opted for the less hassle pre-fab online kit. The material is well made, same as the hardware store, except the threads are shorter for easier assembly, and its painted for a cleaner look. I bought the 12"Dx42"L kit, and although I knew the measurements, it was a lot more massive than it looked in the picture. An 8' or 10"x 24"L kit would have fit my needs better. I only assembled 2 of the 3 sections, and will use the single section leftover for another shelf elsewhere, so it wasn't a problem. I'm happy with the end result and would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 28, 2020
★★★★★ 5
So beautiful!
Size: 42inch Tall (NOT included wood planks), Color: Black, Size: 42inch Tall (NOT included wood planks), Color: Black
The poles are very sturdy. The order doesn’t come with wood but I only spent ~$15-20 on the wood and stain needed to shelve the poles. The only complaint I have is it was hard to install; mostly due to my lack of experience. It took most of the day to install and stain and cute the shelves. The poles weren’t completely flush to the wall and I couldn’t figure it out for the life of me. I love the way these turned out and I know these shelves will be coming with me to the next home I have. 10/10 would recommend, even with the hard installation. SO worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 26, 2019
★★★★★ 5
Fantastic for furniture making
Size: 16 x 18 Inch, Size: 16 x 18 Inch
Frankly, I didn't know what to expect... But these turned out to be exactly what I was looking and hoping for.
These table legs were so easy to assemble. They come with adjustable feet so you can have a level table no matter your tabletop shape or floor situation. Assembly is done with a simple Allen key. Printed instructions are included with simple diagrams that are so easy to follow.
Also, the seller provided all the hardware needed and more! They provided multiple black screws of different sizes that fit through the top holes of the legs, making it so easy to screw the leg base into the table top (use an electric drill with a Philips head for that). I had zero issues with any of the hardware provided.
The base has a nice smooth black powder coat application on the metal. Shipping was so quick too.
Seriously, if you are looking for a low cost, easy to assemble, good looking, and adjustable end table base, get this. I ended up making plant stands with these using some tree slices I had as you can see in my photo.
10/10 highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 3, 2026
★★★★★ 5
Great value, sturdy product
Size: 16 x 18 Inch, Size: 16 x 18 Inch
Made a custom built 24" round resin pour table, and this worked great for the base, looks good too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026