SEVA- MV-F003-802-4 - 0,75KW - 8 bis 92 Upm Stirnradgetriebe+ FU-Motor ED230
SKU: 30162208680

SEVA- MV-F003-802-4 - 0,75KW - 8 bis 92 Upm Stirnradgetriebe+ FU-Motor ED230

$463.93 $515.48
Save 10%
No.2 Bestseller on horizonhouseperu.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

SEVA- MV-F003-802-4 - 0,75KW - 8 bis 92 Upm Stirnradgetriebe+ FU-Motor ED230Stirnradgetriebemotor mit Mglichkeit zum Flanschanbau von B3 in B35, Leistung= 0,75 KW, Drehzahl= 8 bis 92 Upm, bersetzung (i)= 18,20, Drehmoment (M)= 88 Nm, Betriebsfaktor (fs)= 0,9. Bauform= B3 (B35 gegen Aufpreis), Welle= 20x40 mm, Gewicht= 25,2 kg, Farbton= RAL5010, Temperaturfhler= 3 x PTC Kaltleiter, Betriebsart= S1 100% ED. Bei Bestellung bitte gewnschte Einbaulage auswhlen! Frequenzumrichter Leistung= 0,75 KW, Baugre= A, Eingangsspannung= 1 x

Stirnradgetriebemotor mit Möglichkeit zum Flanschanbau von B3 in B35,

Leistung= 0,75 KW, Drehzahl= 8 bis 92 Upm, Übersetzung (i)= 18,20, Drehmoment (M²)= 88 Nm, Betriebsfaktor (fs)= 0,9.
Bauform= B3 (B35 gegen Aufpreis), Welle= 20x40 mm, Gewicht= 25,2 kg, Farbton= RAL5010,
Temperaturfühler= 3 x PTC Kaltleiter, Betriebsart= S1- 100% ED.

Bei Bestellung bitte gewünschte Einbaulage auswählen!

Frequenzumrichter
Leistung= 0,75 KW, Baugröße= A, Eingangsspannung= 1 x 230V +10% (einphasig), Eingangsfrequenz= 50/60 Hz,
Ausgangsfrequenz= 0- 400 Hz, EMV-Filter= C1, Schutzart= IP65, Abmessung= 233mm x 153mm x 120mm,
Netzstrom (Eingang)= 6,9 A. Idealer Regelbereich= 5- 60 Hz, bei gleichbleibendem Nennmoment, unter 30 Hz wird
zur Kühlung ein Fremdlüfter benötigt.

Produktinformationen
Der Frequenzumrichter bietet optional die Möglichkeit, mit Hilfe von Feldbusmodulen „busfähig“ zu werden.
Mit CANopen, EtherCAT, Modbus (bereits enthalten), Profibus, Profinet und Sercos bietet der EASYdrive Kompatibilität mit 
fast allen gängigen Steuerungsumgebungen an. Der Kunde kann das für ihn relevante Bussystem 
auswählen und den EASYdrive  so ideal in die Steuerungsumgebung seiner Applikation integrieren. 
Die benötigte optionale Ansteuervariante ist bei Bestellungen mit anzugeben. 
Die EASYdrive Antriebsregler sind CE, UL und CSA zertifiziert. Der EASYdrive hält ohne externe Filtermaßnahmen
die EMV Klasse C2 (bei 3-phasiger Netzeinspeisung), bzw. C1 (bei 1-phasiger Netzeinspeisung) ein.

                                       ! Mögliche Variantenauswahl !

             

Produktauswahl
Bei der Auswahl des Frequenzumrichters ist darauf zu achten, dass es 3 Varianten gibt. Hierzu zählt erstens das Gerät
in Standard- Ausführung, zweitens das Gerät mit einer Folientastatur und drittens das Gerät mit einer MMI-Bedieneinheit. 

Der dargestellte „Frequenzumrichter in Standardausführung“ ist voll einsetzbar und enthält ein seitlich eingebautes
Potentiometer, benötigt aber zur Ansteuerung ein entsprechendes Bedienteil. 
Hierzu ist eine der folgenden Optionen mitzubestellen:
- Externes Bediengerät (MMI mit Kabel u.Stecker)
- Schnittstellenkabel für die PC-Programmierung   
- Bluetooth- Adapter

Die Variante "Frequenzumrichter mit Folientastatur“ enthält ein eingebautes Potentiometer, und bietet die Möglichkeit, den
FU direkt anzusteuern, wie z.B. Start- Stop, Links- Rechts- Lauf usw. 
Zur Parametrierung ist ebenso eine der folgenden Optionen mitzubestellen:
- Externes Bediengerät (MMI mit Kabel u.Stecker)
- Schnittstellenkabel für die PC-Programmierung  
- Bluetooth- Adapter

Die Variante "Frequenzumrichter mit MMI-Bedieneinheit“  benötigt  kein optionales Bedienteil,
zudem ist im Gerätedeckel ein Display enthalten. Die erwähnten Optionen sind bei Bedarf  einsetzbar. 

Programmierung
Der Drehstrommotor mit integriertem EASYdrive- Frequenzumrichter ist bei Lieferung aus Sicherheitsgründen
nicht programmiert! Sollten weiterführende Parametrierungen notwendig sein, bieten wir diese Einstellarbeiten
zu einem Stundensatz von 86,-€/ netto an.   

   

   

Wichtige Hinweise
Bei diesem Antrieb handelt es sich um eine Sonderanfertigung. Ein Rücktritt oder Widerruf vom Kauf ist ausgeschlossen!
Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 30162208680

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 784 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Fort Morgan, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Omaha, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Verified Purchase
Andy Sims
Boise, US
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
Y
Verified Purchase
Yuliet carreño cutiño
Lexington, US
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
N
Verified Purchase
Nana rice
New York, US
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026

recommand products

Garvee Sammelteppich Orientalisches Distressed-Design 160 x 230 cm Blau Pflegeleicht Für Wohnzimmer Und Schlafzimmer
51.99
Garvee Universelle Scooter-Beinabdeckung, wasserdichte, mit Fleece gefütterte Scooter-Decke für Kälte und Regen, multifunktionale Rollstuhl-Beinabdeckung, schwarz
29.99
GARVEE Kommode mit Schubladen, mit Steckdose& LED,8 Schubladen,Multifunktionaler schubladenschrank für Schlafzimmer und Wohnzimmer - Stabile und langlebige Sideboard,120*36*75cm
67.99
GARVEE Vintage Großes Vloerkleed 200x290 cm, Waschbar, Antirutsch, Pluisfrei, Für Wohnzimmer & Schlafzimmer
62.99
Garvee 6V Kinder Elektro Motorrad Gelb mit Musik und 3 Rädern für sicheres Fahren ab 3 Jahren im Innen- und Außenbereich.
59.99